Interlocking Pavers – All You Need To Know

fix your interlocking pavers

Interlocking pavers can be very beautiful when done well. If appropriately fixed, interlocking pavers bring this unique elegance to our homes and buildings. Understandably, not everyone can capably fix your interlocking pavers. Definitely, some technical experience is required. Yet issues can still arise and you may be baffled the remedy to adopt. Let us examine some the common issues of interlocking pavers and the corresponding way out of the mess.

Sometimes you notice settling in areas of your interlocking pavers

This can be really worrisome. For areas of your interlocking pavers to settle, it is most likely the compaction is insufficient.  This is even common on sites where the pool or the house is freshly built and backfilled. The probability is therefore high that these backfilled soils were not adequately compacted before being used on your home or swimming pool. This is even more likely when the ground underneath your paver has been inappropriately filled after being dug up.

To solve this issue of settling pavers, it would be necessary to pull up the pavers in the first place. After this pulling activity, you would bring in more gravel base. This is actually targeted at enhancing the compaction. Now after you have restored the base to the appropriate level, you can now safely reinstall your interlocking pavers as well as your bedding sand.

You could also notice that water is pooling up on the interlocking pavers

This to a large extent takes the attraction off the interlocking pavers with even associated health dangers.  Now if water is collecting on your interlocking pavers, two things must have likely gone wrong. First, the installation was carried out at the wrong pitch thus it is now plagued with a low spot. Secondly, the problem could be that the compaction was inadequate hence with time, it has experienced settling.

While really a concern, you can fix this problem. This can be done by pulling the area which has undergone settling, possibly improving the compaction with the addition of more base. After this, you would carry out the reinstallation of the interlocking pavers. Now you are good to go and wouldn’t have to worry about your beautiful interlocking pavers getting submerged in an ugly pool of water.

The borders could appear like they are falling off

Sometimes the borders could have this depression like they are possibly falling off. This is quite common. It is conceivable that there is limited edge restraint binding the patterns closely. This could be readily remedied as well. You could promptly bring in your edge restraints. One of the commonest used in this instance is the PVC edging. This has the capacity of spiking into the gravel base where you have the pavers installation the pavers are installed on.

When your interlocking pavers along a fixed edge start to disappear

Most times, this is triggered when the sand setting together with the gravel base have escaped. Thus they could have been washed from beneath your interlocking pavers. What is the solution to this? You can use a filter fabric beneath your base as well as up the sides to avoid such an occurrence. You could equally patch in a piece of fabric as well as a fresh base, following this up with the reinstallation of the pavers.

Therefore there we are. These are some of the common issues you could battle with your interlocking pavers. Now you are in a better position to procure solution and enjoy the uninterrupted beauty of your interlocking pavers sustainably.